N
Common Ground News

Does a Magic Eye work with Virgin?

Author

Chloe Ramirez

Updated on February 26, 2026

Does a Magic Eye work with Virgin?

You can do it but not with a conventional sky type magic eye. Run a coax cable from the RF out of the v box (living room 2) to the TV in the bedroom.

Just so, can I use a magic eye with Virgin Media?

Our IR system works with standard magic eyes that are normally used to control a Sky box remotely. Alternatively if you have stopped using Sky and have swapped to another provider such as Virgin, our product can be used to help you gain control your new device remotely again.

Also Know, how do you connect Magic Eye? Stage 1: Install and test your magic eye directly off set top box

  1. Ensure that the box is turned on connected to the TV.
  2. Connect the magic eye to the back to the "RF 2" outlet on the back of the box.
  3. Press the "services" button your remote.
  4. Select "system setup"
  5. Press '0′, '1′ & 'Select" in quick succession.

Moreover, what does a magic eye do?

This "Magic Eye" remote extender lets you control the TV channels on your digital satellite box from another room in your house. The device connects between the coaxial cable and the aerial socket on the back of the TV.

Why is Magic Eye not working?

Re: Magic eye suddenly not working

The most likely cause is poorly fitted plugs at one or both ends of the coax cable which runs from your Sky box to the TV upstairs. You can check that the magic eye isn't faulty by plugging it directly into the rf2 socket to see if it then ! ights.

How much is multi room with Virgin?

Virgin Media's multiroom offering comes in the form of additional Tivo or V6 boxes that cost £7.50 per box per month on top of the TV package costs. Meanwhile, BT offer Extra Box to customers who want to watch BT TV in more than one room for £5 per month.

How does Magic Eye Work TV?

Magic Eye Installations, also known as Sky TV Links enable you to view your Sky channels from another room as well as change the channels on your Sky, Sky+ or Sky+HD box from another room. By pointing a Sky remote at the receiver, it sends a signal down the aerial wire to a Sky box and changes the channels.

How do I connect my TV to my eye?

When a TV link is plugged in and it does not want to power-on or function properly, the steps below should be followed.
  1. Press menu button.
  2. Select advanced option.
  3. Enter the pin 9949.
  4. Select equipment setup.
  5. Select no.3 on the menu (TV Link/Auxiliary)
  6. There will be two options on/off, this option must be set to on.

Does Magic Eye work with Sky Q?

Magic Eyes / TVLinks will not work with Sky Q boxes as there are no RF outlets on the box for the Magic Eyes / TVLinks to connect to. Instead, we recommend using a Sky Q Mini alongside a subscription to Sky Q experience if you wish to view Sky Q in another room.

Can you use 2 magic eyes on a sky box?

Re: How many magic eyes from a sky box? You can certainly have 2 magic eyes working but to do this you must have them connected to a compatible amplifier to allow the signal to pass through.
A tvLink lets you connect a second TV to your Sky+ box so you can watch Sky in more than one room. If you have a terrestrial aerial, connect it to your Sky+ box or iO-Link. This will give you terrestrial TV on your second TV as well.
To use a TV Link, you need to have an aerial cable running from your Sky box to a second TV. The Sky TV Link is a dongle that plugs into a second TV set and has an infrared receiver. Point a Sky remote at the receiver, and it sends a signal down the aerial wire back to a Sky box and changes the channel.

How can I get Sky in another room for free?

How Can I Get Sky In Another Room For Free? Compared to the Sky+, Sky Q does not require you to physically connect additional Sky boxes to your satellite dish to get access to shows in different rooms. The Sky multi-room feature allows you to use wireless mini boxes that communicate with your main Sky Q box.
  1. Turn off the power to your Sky box.
  2. Plug iO Link into iO port on the back of your box.
  3. Connect the iO Link to the TV Link using the coaxial cable.
  4. Turn the power back on. ( Wait 3-4 mins before trying to take your Sky box out of standby)

How do I watch Sky on a second TV?

What do I need for a tvLink? Your tvLink (available from Sky Accessories). An aerial (coaxial) cable long enough to reach your second TV from your Sky box, but not longer than 30 metres. Your tvLink may not work reliably if you use two or more cables joined together, so try to use a single length.

How do I turn on rf2 on Sky HD box?

How do I activate the RF2 output on my SKY™ box?
  1. Press the SERVICES button.
  2. Press the NUMBER 4 button, then the NUMBER 0 then the NUMBER 1 button.
  3. Press SELECT button.
  4. Press the NUMBER 4 again.
  5. Press the DOWN ARROW button once.
  6. Press the SIDE ARROW button once.
  7. Press the DOWN ARROW button once again [save new settings]
  8. Press SELECT.

What frequency is sky RF output?

How To Change The RF Output Channel On Sky Box. If you need to change your RF output channel on your Sky, Sky+ or Sky+HD box follow this instruction guide. The factory setting for the RF output is UHF channel 68 which is not a good channel to be using as this now a frequency group occupied by 4G mobile broadband.

Does Sky HD box have RF output?

The RF Output Channel is in the Installer Menu. If you have a Sky+HD box, you get to the Installer Menu by keying Services,0,0,1,Select on your remote. For earlier Sky boxes, it's Services,4,0,1,Select. With regard to the kitchen TV, check that it has an analogue tuner.

How do magic eye pictures work?

When someone looks at a Magic Eye, the repeating pattern feeds the brain the depth information encoded into it, and the brain perceives the hidden picture. In the image, Julesz selected a circular area of dots within the image and slightly shifted the area in a second image, reports.

How can I control my Sky box from another room?

Press 'Services' on the Sky remote, then type 4 0 1 and press 'Select' (HD boxes: 'Services' , 0 0 1 then 'Select') Select the “RF outlets” option. Change the RF channel number to a number of your choosing (between 21 and 68). It's important not to clash with a TV service on the same number.

How do you reboot sky box?

Carry out a System Reset
  1. Turn your box off at the mains, then press and hold the left and right arrow buttons on your box.
  2. While still holding the buttons, switch your box on at the mains.
  3. The box will take a few minutes to complete the System Reset and will then switch to standby.

How do I get the volume to work on my Sky remote?

Press Home on your Sky Q remote 2. Select Settings followed by Setup 3. Select Audio Visual then HDMI Control and set it to On. To check that it's worked, hold the standby button down for 3 seconds.

Related Documentation

What should I check before delivery of a new car?

Where is NY Presbyterian Hospital located?

What is the plural word for giraffe?

Does a Magic Eye work with Virgin?