N
Common Ground News

How do I pair my Soundcore spirit x2?

Author

Mia Phillips

Updated on February 22, 2026

How do I pair my Soundcore spirit x2?

Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “SoundCore Spirit” device from the list. Once the pairing has been successful, the headphone's LED will stay solid blue.

Just so, how do I pair my SoundCore spirit headphones?

Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “SoundCore Spirit” device from the list. Once the pairing has been successful, the headphone's LED will stay solid blue.

Beside above, how do I pair SoundCore 2? Go into Bluetooth settings on your device and select SoundCore 2 to connect. No passcode is required. There's a reassuring sound when the speakers connects, and the blue LED stops flashing. A single press of the Bluetooth button will disconnect from an already paired device and return the speaker to its pairing mode.

Additionally, how do I put my SoundCore speaker into pairing mode?

Upon first start, the Anker speaker is automatically set to the pairing mode and the blue LED flashes rapidly. If you have used the speaker before, simply press the Bluetooth button for approx 2 seconds. The speaker is now ready for pairing and can be connected with other Bluetooth enabled devices.

How do you put Anker headphones in pairing mode?

Two methods to get to pairing mode. Turn off the Bluetooth, or be distant from, the last connected device, the Slim will then entering pairing mode automatically when turned on. Turn on the Slim and press and hold vol up and down for a few seconds.

How do I reset my Soundcore spirit x2?

If you're looking to completely reset the headphones then you'll have to hold down the button for about 10 seconds. Doing this will clear any devices saved on the earbuds so that you can start from scratch.

How do I reset my Soundcore Bluetooth headphones?

Place one earbud in the charging case and make sure it's charging (The LED indicator will be solid white) Step 3. Tap and hold the multifunction touchpad of the earbud (currently in the charging case)for 7 seconds until the LED indicator flashed 3 times. This clears the paring information.

How do I pair my Soundcore life note?

Enable the Bluetooth on your phone. You can find the device name "Soundcore Life Note " or “Soundcore Life Note-L” on the Bluetooth list. Please click "Soundcore Life Note " or “Soundcore Life Note-L” for pairing, the white light will flash slowly, which means it paired successfully.

How do I use Soundcore?

How to Use:
  1. Tap the right earbud twice to pause or play music.
  2. Tap and hold the right earbud to play the next song, or do the same on the left earbud to play the previous song.
  3. Tap the right earbud twice to answer or end a call.

How do you pair Anker noise Cancelling headphones?

When fully charged, the color of the light turned blue. To turn on the power of SoundCore Space NC, press and hold the power button for 1 second OK. Next, in order to connect SoundCore Space NC with Bluetooth, press and hold the power button on the right ear pad for 3 seconds to enter pairing mode.

How do I put my Soundcore Liberty Neo in pairing mode?

Take the left earbud from the charging case or press once to turn on the left earbud—the white indicator light will be flashing. Then, quickly tap three times to enter pairing mode. The white indicator will flash slowly. Search “Soundcore Liberty Neo L” and pair it with your phone.

Why can't I connect to my Anker Soundcore?

Try clearing previous Bluetooth pairings from the Anker SoundCore's memory to see if this resolves the issue. You can do this by pressing both the “Volume Down” and “Volume Up” buttons for roughly three seconds. Try pairing the Bluetooth speaker with your device again to see if this resolves the issue.

How do I connect my Soundcore icon?

The Pairing lights just stay as flashing blue.

Icon Mini

  1. Turn the two speakers on.
  2. Press the bluetooth button on both speakers at the same time until the bluetooth light turns solid white.
  3. Release the bluetooth button for one speaker but continue pressing the button on the other speaker for another three seconds.

How do I pair my SoundCore boost?

Press "power" once to turn on, and once to turn off. Long press "power" to enable Bluetooth pairing. Playtime varies depending on volume and audio content.

How do I pair SoundCore Motion Plus?

You hold bluetooth button down for a second to enter pairing mode, indicated by flashing blue light. This is the “primary speaker” Turn on your second speaker. Hold the bluetooth button down for 3 seconds and white light flashes indicating it wants to stereo pair with another speaker.

How do I pair SoundCore mini?

Turn on the SoundCore Mini 2* speaker pressing the “Power” button on the unit's left side. Then select the Bluetooth mode by pressing the “Bluetooth” button which is also located on the unit's right side. The speaker is now ready for pairing.

How do I reset my SoundCore speaker?

Hard Reset ANKER SoundCore Bluetooth Speaker
  1. To start ANKER SoundCore Bluetooth Speaker reset, you need to forget the Bluetooth pairing on every device which has been paired with ANKER speaker.
  2. Press and hold the Power Button for over 8 seconds.
  3. Then click and hold Bluetooth Key for 2 seconds.
  4. Blue light should start blinking.
  5. Good Job!

Do Anker earbuds work with iPhone?

The Soundcore Life P2 True Wireless Earbuds fully cuts the cord. To top it all off, these earbuds feature noise cancellation. These work fine with the iPhone 11, 11 Pro and 11 Pro Max as well. The Anker Soundcore Spirit 2 and the Anker Soundcore Life P2 are solid deals during this sale.

How do you turn on Anker wireless earbuds?

Unplug it, press the power button for 3 to 5 seconds until it powers on. Occasionally you may have to hold down the power button longer but very rarely should you have to do that. The power button is the multimedia button in the center.

How do you turn on SoundBuds?

Those should turn on by holding the center button. If they do not do so after charging overnight I would contact anker support. Chances are you have purchased the upgraded Soundbud Slim model. As advised by @andrewGholden374 the Soundbuds should power on from the play button after a 3-4 second press.

Why won't my SoundBuds slim connect?

Please try deleting the pairing history on your device, resetting your device. Please try to reset your headphones by pressing volume + & volume- together for 2s and then pairing with your device again. Make sure the Bluetooth is turned on for both the Anker headphone and your device.

Related Documentation

How much does it cost to learn Korean in Korea?

What are the core values of ROTC?

How long to pre cook ribs before grilling?

How do I pair my Soundcore spirit x2?