Common Ground News

Get Updates

How do I turn off HP setup utility?

Author

Penelope Carter

Updated on March 02, 2026

How do I turn off HP setup utility?

Exiting the Setup Utility

To exit the Setup Utility and save your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Saving Changes, and then press enter.

Keeping this in view, how do I get out of HP setup utility?

To close the Setup Utility without saving your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. After the Setup Utility closes, the computer restarts in Windows.

Likewise, how do I get out of BIOS setup utility? Press the F10 key to exit the BIOS setup utility.

Beside this, how do I turn off HP Sure Start?

Step 1: Keep tapping F10 key (A few HP products use F2 or F8.) just after you power up your HP laptop (At this point the screen is still black.) Soon you can see the BIOS setup utility. Step 3: On the pop-up light blue window, disable Secure Boot and then enable Legacy Support using arrow keys and Enter key.

What is HP setup utility?

This document is for HP and Compaq desktop computers. The BIOS (Basic Input Output System) controls communication between system devices such as the disk drive, display, and keyboard. You can update the BIOS if Windows starts or does not start.

What is the boot key for HP?

Turn on or restart the computer. While the display is blank, press the f10 key to enter the BIOS settings menu. The BIOS settings menu is accessible by pressing the f2 or the f6 key on some computers. After opening the BIOS, go to the boot settings.

How do you unlock bios on HP?

Boot up your computer and then press the F8, F9, F10 or Del key to get in to BIOS. Then quickly press the A key to show the Advanced settings. In the BIOS, press Fn+Tab for 3 times.

How do I activate my HP printer?

Installing an HP Printer in Windows Using a USB Cable

Go to 123.hp.com, enter your printer model, and then follow the onscreen instructions to download your driver.
Go to HP Customer Support - Software and Driver Downloads, enter your printer model, if prompted, and then confirm the operating system version is correct.

How do I change BIOS settings?

How to Configure the BIOS Using the BIOS Setup Utility

Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST).
Use the following keyboard keys to navigate the BIOS Setup Utility:
Navigate to the item to be modified.
Press Enter to select the item.
Use the up or down arrow keys or the + or – keys to change a field.

How do I go to BIOS settings?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10's advanced start menu recovery settings.

What is insydeh20 setup utility?

What is InsydeH2O Setup Utility? InsydeH2O Setup Utility is one of the most common BIOS setup utilities. It is a hardware configuration program built in BIOS where you can change some basic computer hardware settings. Most computer models like Acer, Lenovo, Dell, HP, Toshiba, Samsung, and Sony are using it.

How do I get into the BIOS in Windows 10?

Select Troubleshoot from the menu, and then click Advanced Options. Click UEFI Firmware Settings, then select Restart. The system will now boot into the BIOS setup utility. To open the Advanced Startup settings in Windows 10, open the Start Menu and then click on Settings.

How do I enter the BIOS on Windows 7?

How to open the BIOS in Windows 7

Turn off your computer. You can only open the BIOS right before you see the Microsoft Windows 7 logo when starting your computer.
Turn on your computer. Press the BIOS key combination to open the BIOS on the computer. Common keys to open the BIOS are F2, F12, Delete, or Esc.

What is HP Sure recover?

1 Leveraging the capabilities of the HP Endpoint Security Controller, HP Sure Recover lets you quickly and easily reimage your device using only a network connection—and can even enable IT to schedule reimaging for the entire fleet. For small businesses, HP Sure Recover pulls the latest OS from HP.

Press F10 to open BIOS Setup. Use the right arrow key to choose the System Configuration menu, use the down arrow key to select Boot Options, then press Enter. Use the down arrow key to select Secure Boot, press Enter, then use the down arrow key to modify the setting to Disabled. Press Enter to save the change.

Do I need HP Sure Start?

A: HP Sure Start protects against any unauthorized changes to the BIOS code or BIOS settings, both for the boot time code and the runtime code. These capabilities protect you from a variety of different attacks, including new BIOS attacks that may arise in the future.

What is protected by HP Sure Start?

HP Sure Start Protects Your BIOS

A BIOS scanning aspect of HP security software called HP Sure Start ensures that your device runs properly upon boot up each and every time. If a corrupt version of the BIOS does wind up being detected, the device automatically restarts using a clean copy of the BIOS.

What does turning off secure boot do?

Originally designed as a security measure, Secure Boot is a feature of many newer EFI or UEFI machines (most common with Windows 8 PCs and laptops), which locks down the computer and prevents it from booting into anything but Windows 8. It is often necessary to disable Secure Boot to take full advantage of your PC.

What is sure start recovery?

HP Sure Start can automatically detect, stop, and recover from a BIOS attack or corruption without IT intervention and with little or no interruption to user productivity. In the case of an attack, the PC can self-heal using an isolated “golden copy” of the BIOS in less than a minute.

How do I use HP Sure Start Recovery?

Make sure the power cord is connected to the notebook. Keep it connected during the recovery process. Insert the USB flash drive with the BIOS file into an available USB port on the notebook. Press and hold the Windows key and the B key at the same time, and then press and hold the Power button for 2 to 3 seconds.

How do I disable PXE BIOS HP?

Enabling or disabling network boot for a NIC

From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > Network Boot Options and press Enter.
Select a NIC and press Enter.
Select a setting and press Enter.
Press F10.

How do I get out of UEFI BIOS utility EZ mode?

Navigate to the top-level Save & Exit menu. Use the up and down arrows to select the exit action you want. To select the option, press the Enter key.

How do I turn off UEFI setup utility?

The Fn keys can be used to issue commands to the UEFI (BIOS). Try pressing F1 and see if it brings up a list of Fn associated commands. Look for "Quit Without Saving Changes", and press that Fn key. That should get you out of the UEFI and force a re-boot.

How do I reset my BIOS to default?

Reset the BIOS to Default Settings (BIOS)

Access the BIOS Setup utility. See Accessing BIOS.
Press the F9 key to automatically load the factory default settings.
Confirm the changes by highlighting OK, then press Enter.
To save the changes and exit the BIOS Setup utility, press the F10 key.

How do you restore a HP computer to factory settings?

To do this, you need to open the Choose an option screen.

Start your computer and press the F11 key repeatedly.
On the Choose an option screen, click Troubleshoot.
Click Reset your PC.
On the Reset your PC screen, click Next.
Read and respond to any screens that open.
Wait while Windows resets your computer.

How do I completely reset my HP laptop?

The first step is to turn your HP laptop on. You can also restart it if it is already on. Once it begins the booting process, keep clicking the F11 key until the computer boots to Recovery Manager. That is the software you will use to reset your laptop.

What is the BIOS setup utility?

The BIOS Setup utility reports system information and can be used to configure the server BIOS settings. BIOS has a Setup utility stored in the BIOS flash memory. The configured data is provided with context-sensitive Help and is stored in the system's battery-backed CMOS RAM.

Press F9 to open the Boot Menu. Use the down arrow key to select a device under the Legacy Boot Sources heading, and then press Enter. The computer starts Windows 10.

How do I enable VT on my HP laptop?

Turn on the computer, and then immediately click F10 to enter BIOS. Under the Security tab, use the up and down arrows to select USB Security, and then press Enter. Use the up and down arrows to select Virtualization Technology (VTx), then use the left and right arrows to select either Enabled or Disabled as desired.

How do I overclock my HP laptop?

Depending on the configuration of your specific laptop, you might also see a tab that lets you overclock the system memory and get a second boost in performance. Select that tab and click the "Turbo" option to accelerate your RAM. Click again to accept the changes, and your system reboots with the new settings.

What does BIOS stand for?

Basic Input/Output System

Related Documentation

How do I remove an inactive payment from PayPal?

Can PotPlayer play Blu Ray?

How did Nelson Mandela overcome apartheid?

How do I turn off HP setup utility?