- Wipe down the seat to remove any oil and dust.
- Mix French Linen with water (2:1) and brush on the seat with a Small Annie Sloan brush. Allow to dry approx 20-30 minutes.
- Brush on Dark Wax, wipe off.
- Brush on White Wax, wipe off.
- Using 0000 Steel Wool (Super Fine), burnish the seat by rubbing quickly to uff to a sheen.
In respect to this, how do you get the Restoration Hardware look with chalk paint?
How to get the “Restoration Hardware” Look
- Cover your piece in two coats of Annie Sloan's French linen Chalk paint.
- The second step is to apply a wash of graphite directly over the French linen paint.
- Once that has dried, which may take longer than usual because of the water added, it's time to wax.
- This last step is totally optional.
Similarly, how do you finish the Restoration Hardware table? “Clear furniture wax can be applied to protect the finish from minor spills. Use coasters or placemats to help prevent marks or stains” and to “Wipe the table clean with a soft, dry cloth after each use.” Their site also says “Care: Wipe using a damp cloth with mild soap and water, followed by a dry cloth.
Similarly, you may ask, can you whitewash with chalk paint?
For the whitewash wood effect, I used a DIY Chalk Paint watered down in a 1:1 ratio. {ANY water based paint will work} Approximately 1 part paint to 1 part water… aka 50/50 mix. You can easily adjust how much water you add in relation to the thickness of your paint and how opaque you want your finish.
How do you do a GREY white wash?
Method 1Washing with Paint and Water
- Lay down a tarp or dropcloth.
- Sand the wood to remove paint and imperfections.
- Apply a wood stain with a foam brush.
- Let the stain sit for five minutes before you wipe it off.
- Select a grey latex paint to use for the wash.
- Mix four parts water to one part paint.
