N
Common Ground News

Is 3 inch lift kit legal in Victoria?

Author

Mia Phillips

Updated on February 28, 2026

Is 3 inch lift kit legal in Victoria?

yeah from memory the vic roads rule is you cant lift it for than a 3rd the height from the bump stop to the top of the something orather .. , so basically a 2 inch lift is the max "legal" lift you can have.

Similarly, it is asked, how much lift is legal in Vic?

So there you have it. Finally, 75mm tyre/suspension lifts are legal – in NSW and Victoria at least – but we have two different 'standards', which both differ from the agreed national code of practice.

Beside above, are 4 inch lift kits legal? Duncan Gay, the Minister for Roads, Maritime and Freight in NSW, has recently announced via Facebook, that the laws surrounding vehicle suspension lifts have changed. Now, you can lift your 4X4 a total of 75mm: 50mm through the suspension, and 25mm through the tyres.

Keeping this in view, is 3 inch lift kit legal?

Currently in NSW the VSB14 allows a 50mm lift (increase in vehicle height due to suspension and/or tyres), any higher than 50mm will require certification. This limits 4WD owners to the industry average 50mm – or 2” as it's often referred to – suspension lift and restricts them to standard size tyres.

What is the legal limit for a lift kit?

In California Body Lifts are limited to a maximum of 5 inches. Suspension lifts are also restricted by state frame height laws. The maximum frame height for vehicles under 4,500 GVWR is 27 inches, 4,501-7,500 is 30 inches and 7,501 to 10,000 have a maximum height of 31 inches.

yeah from memory the vic roads rule is you cant lift it for than a 3rd the height from the bump stop to the top of the something orather .. , so basically a 2 inch lift is the max "legal" lift you can have.

Is it worth lifting your truck?

If you're using your truck for primarily city or highway driving, then there is no real benefit to more ground clearance. In fact, it may hurt performance. However, lifting provides many advantages for off-road use, including greater approach, breakover, and departure angles.
The only thing I can suggest is if they told you the limit is 100mm with 700kg in the back you should load the back with 700kgs of gear and measure the ride height, stock spring may drop 25mm when loaded but but the coilovers with stiffer spring may not drop as much and still be above 100mm clearance if your lucky.
Now in Victoria. Any wheel spacer is illegal with the exception of cars that came fitted with them, ie porsche 911. An IRS beetle with 944 trailing arms is allowed spacers.

Is a 2 inch lift noticeable?

An observant person should be able to tell with just a 2" lift but more importantly you will be able to tell. Most of the time a mini lift such as the one you are talking about is used for leveling the truck out. You can also use the smaller lifts to get a slightly larger tire size to fit under your wells.

Are lift kits illegal?

As with most states, the lift law says that almost any alteration of the suspension of a vehicle is illegal but not heavily enforced.

Do you need a lift kit for 33 inch tires?

You don't "need" a lift, but the tires will rub in some areas, especially when off-road. The front tires will rub the front airdam under the front bumper when turning lock to lock [like in a parking lot]. You can just remove it as it would be removed if you replace the bumper, anyway.
They are legal. They must be made of metal and have the locating pins for the spring and axle.

How high can I legally lift my 4wd?

NSW. Like Victoria, vehicles registered in NSW can now be lifted up to 75mm with a maximum of 50mm diameter (25mm lift) and 50mm from suspension.

Does a lift kit affect insurance?

In general, most policy plans are not going to cover aftermarket parts in the case of an accident. Suspension lift kits and things like that won't be covered without a policy endorsement. The more that you ask your insurance policy to cover, the more you are going to have to pay for that insurance.

Do lift kits need certification?

A body lift on a body/chassis vehicle (commonly a 4x4) always requires LVV certification. the normal relationship between front and rear suspension height is not unduly affected.
Four inch spring lifts can be engineered in NSW. It must be spring lift only, no body lifts, and of course all the other equipment such as break lines, caster etc etc. Max tyre size is 33 inch.

Should I lift my 4wd?

If you go over that without engineering, your vehicle is illegal. The only thing that actually increases your ground clearance is fitting larger tyres, so only lift your 4WD enough to fit the tyres you are running. Remember to stay within the local regulations too, or get your 4WD engineered.

Will a body lift allow for bigger tires?

When lifting your truck or Jeep to add bigger tires, you have two options: a body lift or a suspension lift. While both will lift your fenders enough to allow you to use bigger tires, there are pros and cons to each.

How much is a 2 inch lift kit?

Smaller truck lift kits, those that raise the body by two inches, usually cost anywhere from $400 to $12,000.

Are strut spacers illegal?

The use of coil spacers and strut spacers is not roadworthy in most states. If you need more height, use the right spring for your needs. Airbag helper springs may be fitted in addition to the original suspension, however coil or leaf springs must have the same or higher spring rate than stock.

How much can you legally lower a car?

Under current NSW law a vehicle's suspension can be raised or lowered by up to five centimetres without an engineer's approval, and by up to 15cm with an engineering certificate.

Do lift kits hurt your truck?

First of all, a lift kit is more than just a mechanism to make your truck higher. Also, a lift kit will likely affect the drive of your vehicle. The higher you go, the rougher the ride, so expect the ride to be not as smooth. Lifting and adding new tires, no matter how low or high, will affect your fuel economy.

Should I lift my truck 4 or 6 inches?

A vehicle raised by 6 inches instead of 4 inches will sit on a higher level, therefore be able to perform better in not-so-favorable conditions, even more so if it'll have taller tires installed.

How high can you legally lift a truck?

If you are dealing with a car or an SUV, the maximum bumper height is 22 inches for the front and rear. If your truck is less than 5001 lbs. then it's 24 inches in the front and 26 inches in the rear. From 5001 to 7000 the height is limited to 27 inches in the front and 29 in the rear.

Are wide tires illegal?

Woodard said any vehicle on a public highway can't be wider than eight feet. We can verify tires sticking outside the fender wells is not illegal, but if the total width of a vehicle is more than 8 feet, it is against the law.

Does a lift kit increase the value of a truck?

Does putting a lift kit on your truck decrease its resale value? In a general sense, yes, putting a lift kit on a truck does decrease its value. For me, when buying a used truck, the very last thing I want to buy is a truck with a lift kit.

Are Lifted trucks dangerous?

Vehicles with lifts are more likely to rollover. Rollovers can kill or severely injury the occupants of the truck. Rollovers can also cause other drivers to suffer injuries or death if they collide with the rolled-over truck. In addition, cargo can spill when trucks roll over causing havoc on the roadways.

What the biggest lift kit you can buy?

Full Throttle 18-Inch Lift

If you're lucky enough to own a '99 to '06 GM 1500 truck, you're in luck. Coming in at the biggest lift kit we've got, a whopping 18 total inches is the Full Throttle Suspension lift kit. This kit is crazy.

What's better a body lift or suspension?

A suspension lift is a better choice than a body lift in situations where off-road performance is important. First and foremost, a suspension lift not only provides room for larger tires, but it also increases the ground clearance under the frame.

How tall is a truck with a 4 inch lift?

4" BDS on 33.5" 84-85" at back of cab. 35s add half" to an inch. measuring from the center-line of the wheels, ground to the bottom of the fender, 42.75" in the front, and 43" in the back.